{"id":12102,"date":"2021-12-30T05:51:57","date_gmt":"2021-12-30T05:51:57","guid":{"rendered":"http:\/\/www.alalloycasting.com\/?p=12102"},"modified":"2021-12-30T05:52:18","modified_gmt":"2021-12-30T05:52:18","slug":"molten-aluminum-filter-intalco","status":"publish","type":"post","link":"https:\/\/www.alalloycasting.com\/ar\/molten-aluminum-filter-intalco\/","title":{"rendered":"Molten Aluminum Filter Intalco"},"content":{"rendered":"

Molten Aluminum Filter Intalco uses polyurethane foam as carrier and immerses it into slurry made of ceramic powder, binder, sintering aid, suspension agent, etc.<\/span> Then squeeze out the excess slurry to make the ceramic slurry evenly coated on the carrier skeleton to form the body, and then the body is dried and sintered at high temperature.<\/span><\/p>\n

Molten Aluminum Ceramic Foam Filter Intalco is used to Filter and purify Molten Aluminum impurities.<\/span><\/p>\n

Filter efficiency is related to filter cell size. By carefully controlling cell size within the filter, a more consistent filtration performance can be achieved. Typically, removal efficiency increases as filter cell size and the metal velocity in the filter decrease.<\/p>\n

Molten Aluminum Ceramic Foam Filters<\/a> are classified according to different pore sizes, including 10PPi, 15PPi, 20PPi, 30PPi, etc.<\/span> The mesh classification of sponges is different from that of products. Generally speaking, the larger the PPI value is, the smaller the pore size is and the smaller the inclusions are.<\/span><\/p>\n

\"Molten<\/p>\n

Function of Ceramic Foam Filter<\/span><\/strong><\/p>\n