{"id":3137,"date":"2020-07-27T09:57:58","date_gmt":"2020-07-27T09:57:58","guid":{"rendered":"http:\/\/www.alalloycasting.com\/?p=3137"},"modified":"2020-08-17T08:49:34","modified_gmt":"2020-08-17T08:49:34","slug":"use-of-molten-aluminum-filter","status":"publish","type":"post","link":"https:\/\/www.alalloycasting.com\/tr\/use-of-molten-aluminum-filter\/","title":{"rendered":"Erimi\u015f Al\u00fcminyum Filtresinin Kullan\u0131m\u0131"},"content":{"rendered":"

Use of Molten Aluminum Filter: clean the CFF filter box – gently place the foam ceramic filter plate in the filter box – preheat the ceramic foam filter.<\/p>\n

The CFF filter box should be thoroughly cleaned before the use of molten aluminum filter, so as to prevent the residues left from being immersed in the aluminum liquid. The size of the ceramic foam filter plate should be matched with the filter box, and the matching gap between the two should be as small as possible. After repeated use of molten aluminum filter, the filter plate will be distorted, the force of the filter plate is uneven, and the filter plate is often suddenly broken during the filtration process. Therefore, when the filter box is deformed, it should be replaced immediately.<\/p>\n

Erimi\u015f Al\u00fcminyum Filtresinin Kullan\u0131m\u0131<\/h2>\n

After the filter box is cleaned, coat a layer of BN refractory material on the inner surface of the CFF filtre kutusu<\/a>, and then gently place the foam ceramic filter plate on it.<\/p>\n

Correct preheating is an important part of the use of ceramic foam filter plates<\/a>. Incorrect preheating method often leads to the following problems:<\/p>\n