Menu Close

Foam Filter Manufacturer

Foam Filter Manufacturer

Foam filter manufacturer is made from non-stick aluminium material, the product is white or milky white. Suitable for the production of high quality, high requirements of aluminum and aluminum alloy purification process.

Through physical adsorption and chemical action, various oxide inclusions produced during aluminum smelting can be effectively removed, thus reducing casting defects and improving casting quality.

Foam Filter Manufacturer should be preheated before using CFF, the Filter plate should be completely sealed in the aluminum water filter box to ensure that all aluminum water through the filter plate, the total amount of filtration should not exceed the specified limit. If high, it should be adjusted by multi-level filtering or reduced throughput.

The results show that the foam porosity is over 90%, the compressive strength is up to 2mpa, and the shape stability of the material is considered.

Adding about 8% bentonite to the base component can make the modification effect of aluminum plant filter reach the best state.

The results show that the higher the crystallinity of the foam ceramic base material, the higher the room temperature strength of the material.

Aluminum factory filter uses high quality high purity zirconia as raw material, unique formula, advanced environmental protection technology.

3 d mesh structure, high strength, stable texture, no slag, high temperature resistance, thermal shock resistance.

Foam filter manufacturer for the purification and filtration of high-temperature aluminium and aluminium alloy solutions. It can filter non-metallic slag and micron slag to make the casting surface smoother.

Foam Filter Manufacturer

To reduce processing losses, the filter allows liquid aluminum to fill the cavity more evenly, and the liquid metal has a higher tendency to turbulence during pouring.

After passing through the three-dimensional pore structure, the turbulence eventually transforms into a very stable laminar flow, better filling the cavity.

The impact corrosion of metal solution on the casting cavity is reduced, the scrap rate is significantly reduced, the production cost is reduced, and the labor productivity is improved.

When aluminum and aluminum alloy are dissolved, the filter groove front groove of the filter groove in the aluminum factory forms a smooth filter groove cavity.

Filter front box products have excellent heat resistance, aluminum resistance, solution corrosion resistance, good heat preservation performance, high strength, strong mechanical impact resistance, molding size standard. The filter plate provides reliable support for filtration efficiency.

In addition to general specifications, can also be customized according to customer requirements.

Leave a Reply

Your email address will not be published.