Aluminum Cast Filter supplier AdTech not only produces filters, but also produces and sells Casthouse, Molten Aluminum Degassing Unit, Castertip, Tap Out Cone, etc. Adtech products are sold all over the world, and many large aluminum factories are our customers.
The quality of our alumina ceramic foam filter can pass the test. It is very effective to use a ceramic foam filter surface to remove impurities in molten metal, especially small inclusion particles.
The purification mechanism of ceramic porous filter materials for molten aluminum is generally described as diffusion interception and inertial collision interception or through sieving, precipitation and deep bed filtration. AdTech is a supplier of ceramic foam filters. Our porous ceramic foam uses organic foam with a three-dimensional network structure and connects pores as a carrier to invade the thixotropic alumina material slurry. The ceramic foam filter adopts automatic extrusion equipment to make the slurry evenly distributed in the foam skeleton.
Choose Aluminum Cast Filter
- Choose the right porous filter material to improve the cleanliness of the aluminum melt. According to the impurity content in the aluminum melt, the flow rate of the melt flow and the quality requirements of the casting, the foam ceramic filter plate is selected.
- The quality of impurities is large, and the quality of castings is average. You can choose the larger perforated mesh of the foam ceramic filter plate, and add coarse filter cloth in front of the filter plate. It can intercept large particles of slag and prevent the filter plate from clogging.
- The quality requirements of casting products are very high. Choose a small mesh, that is, a new type of ceramic foam board with a large mesh.
- The size of the filter plate depends on the flow rate of the melt and the total output. The flow rate is large, the total amount is large, the filter plate hole is small, and the selection specification is large.