Menu Close

Slagging Agent

Slagging Agent

In the era of continuous innovation in casting technology, new casting equipment and casting processes are constantly being used. Aluminum alloy slagging agent and large-scale automatic casting molding lines have been quickly promoted and used in aluminum foundry. At the same time, the requirements for smelting efficiency, pouring time, etc., which affect casting grades, elongation, and other indicators, have also been continuously adjusted, and technological progress has also put forward new requirements for traditional casting materials.

AdTech slagging agent is white (slightly gray) powdery fine particles, the main components are chloride salt and fluoride salt, and other compounds. After proper heating treatment and sieving, the particle size is uniform. It can be carried out with gas in a refining tank. It can also be sprayed directly into the surface of the molten metal by hand, and stir evenly to enter the impurity separation effect. It is environmentally friendly and economical, and can meet the production of high value-added, high-tech performance aluminum alloy precision castings such as aviation and transportation. We have two specifications of 622DF and 633DF.

AdTech slagging agent can reduce smoke, reduce its burning loss, the effect is significant, and it greatly reduces the molten aluminum loss during slagging. AdTech deslagging flux utilizes unique technology to enhance the traditional deslagging effect, and this technology applies to the casting process of multi-series aluminum alloy products, such as micron-sized aluminum foil raw material, PS baseboard for printing, canning material, elastic packaging material, railway transportation, aerospace products, cable & wire and other casting aluminum purifying.

Advantages for Deslagging Flux

  1. Uses molten metal compounding combination principle researching, developing and configuring the product, reducing smoke, depressing burning wastage, which protects the environment economically.
  2. Has moderate melting point, good flowability, little dosage for molten metal(1.0-2.0kg/ton).
  3. Can separate aluminum and slag effectively, decrease carrying over molten aluminum when slagging-off.

Leave a Reply

Your email address will not be published.