Ceramic Foundry Filter,Ceramic Foam Filter-sales@alalloycasting.com

Ceramic Foundry Filter

Ceramic Foundry Filter removes inclusions in aluminum alloy melt. Inclusions and gases in the metal have a significant impact on the strength, corrosion resistance, and stress corrosion cracking performance of the material.

Effectively controlling the oxidized inclusions in the melt to improve the quality of cast rods and rolled plates has become a common goal pursued by the metallurgy, casting and material industries of all countries.

The development of foam ceramic materials began in the 1970s and is a porous material with high temperature characteristics.

Its pore size ranges from nanometers to micrometers. It has a high-porosity porous ceramic body with a three-dimensional spatial grid structure. The porosity is between 20% and 95%. Its shape is like tempered foam or porcelain. Sponge, the use temperature is from room temperature to 1600℃.

Since the United States invented the use of ceramic slurries such as alumina and kaolin in 1978 to successfully develop foam ceramics for aluminum alloy casting and filtration, Britain, Japan, Germany, Switzerland, and other countries have competed in research.

The production process of Ceramic Foundry Filter is becoming more and more advanced, and the technical equipment is becoming more and more mechanized and automated. According to different application purposes, a variety of materials have been developed for foam ceramic filters suitable for different purposes.

Such as Al203, ZrO2, Sic, silicon nitride, boride, and other high-temperature foam ceramics, and some also add certain minerals, such as mullite, Dong Qingshi, fly ash, coal ash, etc., and the products have been serialized and standardized , Forming a new industry.

China is a major producer of aluminum products, and the output of aluminum products has always been the world’s largest, but mainly low-end products. With the continuous expansion of market demand, aluminum products must move toward high-end. The use of foam ceramic filter plates can improve the quality of aluminum products and improve product grades to meet the requirements of the high-end market.

Ceramic Foundry Filter

It needs to be specially pointed out that to prevent the secondary pollution of the melt that may occur in the process of solidification and forming after the aluminum melt leaves the filter box.
In this process, use long-life, high-strength, non-stick aluminum, and good thermal insulation fused silica ceramic sintering trough, front box, distribution plate, and hot cap, and timely dehumidification and cleaning to eliminate possible pollution sources. if you need to buy, please contact us anytime.

Ceramic Foundry Filters are the last process of aluminum melt purification treatment. It cannot be ignored to ensure the cleanliness of the aluminum melt.