Foundry Fluxes for Aluminum
Foundry Fluxes for Aluminum are powdery particle that is in full contact with the molten metal. The gas and inclusions in the molten aluminum are brought to the surface of the molten aluminum through physical and chemical effects, and at the same time achieve the purpose of degassing and slag ...
Read More
Read More
Flux for Aluminium Recycling
Flux for Aluminium Recycling is mainly used to remove hydrogen and scum from aluminum and aluminum alloy melts, to make the aluminum liquid more pure, and it also has the effect of removing slag. Refining Agent is easy to decompose at high temperature, and the generated gas can react with ...
Read More
Read More
Flux for Metal Smelting
Aluminum refining flux for metal smelting can be used in a variety of aluminum alloy melts, and can be used for metal scrap refining, and slagging. Only need to sprinkle the refining agent on the surface during use, dissolve it in the aluminum liquid quickly and stir it fully. Adding ...
Read More
Read More
Flux for Sweden Aluminum Recycling
Flux for Sweden Aluminum Recycling is made from a variety of salt compounds through a special process. Spray it with nitrogen or argon as the carrier and spray it evenly into the aluminum melt, the double purification of aluminum and liquid by gas and flux is realized, and refining flux ...
Read More
Read More
Flux for African Aluminum Recycling
Aluminum refining flux for African aluminum recycling has the advantages of being smokeless, odorless, dustless and easy to operate. For example, a special bell for melting treatment is better, and equipment and equipment will not be corroded. , The refined preparation has a good degassing effect. Under normal conditions, the ...
Read More
Read More
Flux for India Aluminium Recycling
Flux for India Aluminium Recycling is mainly used to remove hydrogen and scum in aluminum water, as well as the high-temperature melt refining and purification treatment of aluminum alloy. Its basic function is to remove internal inclusions and hydrogen in the high-temperature melt. The aluminum alloy refining flux is sprayed ...
Read More
Read More
Flux for Aluminium Packaging Recycling
Flux for Aluminium Packaging Recycling is a white powder or granule with uniform particle size. Its main components are chloride salt and fluoride salt. After proper heat treatment and sieving, it is beneficial for the nitrogen in the refining tank to enter the lower layer of molten aluminum uniformly through ...
Read More
Read More
Flux for Brazil Aluminum
Flux for Brazil Aluminum is a granular refining flux. After a large number of applications, the refining agent has been proved to be the best choice for aluminum. The degassing and slagging effect of aluminum alloy is remarkable. Flux for Brazil Aluminum is sprayed by carrier gas (nitrogen or argon) ...
Read More
Read More
Flux for Aluminum Recycling Plant
The Flux for Aluminum Recycling Plant is a white powder or granular flux. After drying with a variety of inorganic salts, it is prepared by mixing in a certain ratio. The Flux for Aluminum Recycling Plant is mainly used to remove the hydrogen inside the aluminum liquid and the floating ...
Read More
Read More
Flux for Recycled Aluminum
Refining flux is suitable for the recycled aluminum and aluminum alloy degassing and refining, which can effectively remove oxide inclusion and hydrogen from the molten aluminum. KCI and NaCl are the most common basic components in aluminum alloy fluxes, mainly acting as covering agents. However, adding a small amount of ...
Read More
Read More