News

Ceramic Fiber Plug of vacuum-formed shape is made of high-quality aluminum silicate insulation cotton, vacuum modeling progress. The purpose of the development of this product is to make high-temperature performance and self-supporting shaped products. Ceramic fiber plug is to make specific products for any requirement, each product according to its ...
Read More

Aluminum silicate caster tips are the key parts of the continuous aluminum trip casting machine, which directly affects the quality of aluminum sheets. The caster tips have many types according to different casting machines. Aluminum silicate caster tips produced by AdTech adopts ceramic fiber and some other refractory materials. The ...
Read More

During the melting and casting of aluminum, bubbles, oxide films, and non-metallic inclusions disrupt the continuity of the metal structure. It will cause stress concentration, lower the performance of the casting, and reduce the processing performance. In order to avoid these hazards, it needs the help of the Ceramic Filter ...
Read More

Aluminum is a metal used often for its relative strength given its lightweight. When aluminum is cast, however, impurities known as inclusions can create weak points in the product. These inclusions will lead to defects in the structure of the aluminum alloy casting. With the demand for higher quality aluminum ...
Read More

Aluminum degassing machine uses an inert gas to remove hydrogen from molten aluminium. Nowadays, the aluminium industry requires strict metal quality standards, so as to improve metal quality and prevent part failures in critical components of automobiles, airplanes and machinery.  Inclusions can lead to reduced fluidity, increased porosity, loss of ...
Read More

AdTech fluxes for molten aluminum refining are fine white ( gray) powder shaped, the main components are chloride and villiaumite, and other chemical compounds. Fluxes are designed for degassing, cleaning, grain refining of molten aluminium alloys, and other purposes. Fluxes are usually added during the melting, holding, or degassing of ...
Read More

Continuous casting is an advanced casting method. Its principle is to continuously pour molten metal into a special metal mold called a crystallizer. The solidified casting is continuously poured from the other end of the crystallizer. Pull out, it can get castings of any length or specific length. Preparation before ...
Read More

Alumina foam ceramic filter plates are very important in improving the quality of smelted aluminum alloy melts, which greatly affect the subsequent processing performance and the quality of the final product. Therefore, all countries in the world attach great importance to the purification of aluminum melt. There are many reasons ...
Read More

Alumina foam ceramics is an important branch of three types of foam ceramics (alumina, silicon carbide, zirconia), and it is also the earliest type of foam ceramics. It is widely used in the aluminum and alloy casting industry. At present, with the continuous improvement of the performance requirements of aluminum ...
Read More

Foundry ceramic filters are made of polyurethane foam plastic and immersed in the ceramic slurry made of ceramic powder, binder, sintering aid, suspending agent, etc. Then squeeze out the excess slurry, so that the ceramic slurry is evenly applied to the carrier skeleton into a green body. The green body ...
Read More